top of page

Lesson 4 - Making models

  Why is it important not to take shortcuts?

In the previous times we defined basic concepts
And we talked about product design and planning.
If you have reached this stage of development
It is likely that you have already seen a 3D visualization of the product,
And you were faced with the dilemma:
Is it necessary to make a model of the product?
Or can the production phase be accessed immediately?
And here is the place for an important and critical tip:

דגם למוצר פלסטיק שחור ומורכב
מדפסת תלת ממדית
מכונה לעיבוד שבבי

Tip #4:

​

Prototyping is a critical step in the product development process
And don't skip it.

Prototyping deserves particular attention. A 3D visualization can make a product feel tangible, and tight budgets and schedules can create pressure to move straight into production. Even a good visualization cannot replace a physical prototype that you can hold, assess for size and test for usability.

A customer once asked me to skip the prototype stage. I insisted that we make one. After handling the prototype, the customer identified further changes and repeatedly thanked me for insisting.

Physical evaluation matters for every product, and especially for medical and high-tech products with demanding requirements. The main prototyping technologies are described below.

1. 3D printing
 

3D printing for the issue allows the production of models from materials
which simulate the final raw material of the product,
And in some printers it is even possible to produce from the final plastic raw material.
This is the most cost-effective technology,
But in some cases a model created by 3D printing will not give a full answer.
For example, when the product is relatively thin,
When you want to test temperature resistance
or when a high level of accuracy is required.

2. Machining

Machining is an old method that gives good results,
Because it makes it possible to produce the model from the final plastic material, with a high level of precision.
The disadvantage of the method is its high cost.
And while it's good, it still doesn't simulate product manufacturing perfectly.

3. Experimental design

מכונה של ייצור תבניות מפלסטיק בעל מובלעת אחת

A prototype injection mold is a useful way to evaluate an injection-molded plastic product. It is a working, single-cavity mold used to produce a relatively small batch of parts in the intended production material.

The samples can be used to assess function, usability, size, weight, color, temperature resistance and compatibility with packaging.

Testing these parts provides an opportunity to improve the design before investing in tooling for larger production volumes.

To conclude: prototyping is a critical stage, and I strongly recommend keeping it in the development process. A prototype injection mold can produce parts that represent the intended final product in appearance and material properties.

These samples allow us to evaluate the product and make changes before regular production, helping avoid wasted time, cost and frustration later.

In the next lesson, I will discuss mold design. In the meantime, you are welcome to email questions to boaz@plastomold.com.

Thank you, and have a good day.

Boaz

bottom of page